Posted: 06 Sep 2008, 15:15
Yes, there is a basic misunderstanding. You have:
... it should be ...
Basically, since you are placing it within the "flashVars" object definition, then you don't put "flashVars" in front of the parameter. If you were assiging the value outside of the flashVars object definition, it would be like this:
Code
var flashVars = {
flashVars.startpath = "content/fabric1/";
};
Code
var flashVars = {
startpath = "content/fabric1/";
};
Code
var flashVars = {
};
flashVars.startpath = "content/fabric1/";